Creating a load plan

In this guide we are going to go through the process of creating a load plan from scratch.

You create a new list through the "Load plans" view and hitting the Create button:

Now you are faced with a dialog where you enter the name of the list. In this case we call it "Demo". In this view you also select what mode of transportation you want to use.

You can also assign the list to a certain folder.

In this guide we will create a load plan for Sea containers. The steps are however the same for the other modes of transportation.

The 4 steps

When working on a load plan in Cargo-Planner we have divided the process into 4 different steps:

1. Data - this is where you enter the cargo data and cargo properties
2. Setup - this is where you select the equipment you want to use as well as some additional settings
3. Workspace - this is how the current load plan looks like where you can also modify it
4. Load plan - this is the last step where you can do printouts etc

1. Data

This is the view were you enter your cargo data and cargo properties.

You can add cargo data in 3 different ways:

1. Manually click on a cell with your mouse and enter the data with your keyboard. Use the Enter , Tab or arrow keys to move around the current cell.
2. Copy Rows and / or columns straight from Excel or similar
3. Use the Excel importer function.

Each row needs at least:

• Length
• Width
• Height
• Weight

data to be accepted.

Have a look at the Cargo properties section to find out more about the different properties you can assign to a cargo.

The Name column will act as an identifier for each cargo type. It can be a string or a number. In our case we just enter some numbers.

If no data is entered in the Name column - the items will be named automatically starting from 1 for the first row, 2 for the second row etc...

When you have added the data you also need to select what length and weight dimension is used. In our case we select cm and kg:

The tool will do a quick check and see if the provided data looks "ok". If it think you might for example have selected the wrong dimension or the volume/weight ratio is off you will get a warning. Maybe your data is still correct - then just continue

You can also enter additional meta data like port of loading, port of destination, customer and estimated time of departure, as well as some additional notes.

The estimated time of departure (ETD) field can be useful as you can then sort your different load plans according to this field so you can see which load plans are most urgent.

2. Setup

This is the step where you select what kind of equipment you have available for this particular load plan.

To the left is a panel with equipment available in the library. The library is divided into three sections:

• Standard units - System defined containers
• Public - Containers created by other users and shared
• Your own - Your own container types within your organization

You can select the default section to show through the Profile view

You can click on each container to see how it looks like, and also study the specifications of it

To the right is a panel with equipment available to this particular load plan

You move containers between the two panels by clicking on the green plus and the red minus buttons.

If more than one container type is available here then the tool will try to determine which one(s) is most suitable.

Each mode of transportation has a default set of containers that will populate this list by default.

You can change the default setup by creating a new or selecting an existing load configuration / preset

Please also have a look at the Load settings to have a look or change the used settings.

If you click on a container in this panel it will be expanded. Now you can change some container properties on the fly:

You can pre load cargoes on pallets or boxes before being loaded into the containers. If you want to do that you need to select the "palletize" column in the Data view for the cargoes you want to pre load and also select a pallet type. Read more about it here

If you want to minimize the work done in this step, we again recommend to create a load configuration

When you are done, press "Create load plan" and watch the magic!

3. Workspace

If all went well a load plan has been calculated for us:

This view contains all the containers needed to load the provided containers. In the top there is a summary containing how many and what type of containers are used, and also the volume, weight and quantity of all the loaded cargoes.

You will also find a table where each row contains information about the specific containers as well as a image of the load layout. The columns should be quite straight forward. The "Ldm x W x H" contains information on the used space in each of the direction, where Ldm means loading meters (which can be useful for truck loads).

If a container is open in any direction and it contains cargoes that is larger than the inside dimensions the OOG column will contain information on which side(s) has overhang.

If you click on the image of a container you will enter the interactive view. Please read more here

If you click on the cog wheel you will be able to modify the load plan which you can read more about here

You'll notice a menu to the right with a warning triangle. If you click on this panel it will expand - this is the unloaded items panel:

It's a panel which contains cargoes from the load list not currently loaded into any container.

Usually you will encounter this view when you create a load plan where some of the cargoes are too big or too heavy to be fit in any of the selected container types. Cargoes may also pop up here if there are any other rules or properties set that for some reason does not permit the cargoes to be loaded.

You will also encounter this view if you are modifying a load plan.

As we see in this example, some of the cargoes found here are either too tall or too wide to be fit in the selected containers. Lets fix that. We go back to 2. Setup view. We then add a 40ft Flat rack container which should be able to house those large cargoes:

We press calculate again and we now see that all cargoes are loaded!

4. Load plan

The last step is where you will find a detailed list of which cargoes are to be loaded on which containers:

You can also click on the Instructions menu to show how to load the cargoes in steps - which could be useful for the warehouse:

Now we select instructions by layer. For containers with no roof - like pallets, the layers will go from bottom up, and for containers with a roof the layers will go from back to front:

What you can also do is share the load plan with a link